UAV Battery with Bluetooth Controlled 9S 21AH

Custom Fixed wing UAV/UAS battery 9S6P  SANYO cells NCR18650GA 32.4V 20.4Ah,best energy density Lithium battery for UAV

We have extensive experience with UV (UAV, UGV, USV) drone batteries for military, industrial, and commercial applications.  We provide power to major drone OEM manufacturers and our battery systems are flying in drones all over the world. 

The solutions we provide are custom drone battery packs tailored to fit the exact requirements of each application, whether larger fixed wing type aircraft requiring large more complex battery systems or smaller drones that need compact and lightweight high energy batteries.  Some of the many drone applications that we support are:

Agriculture

Construction

Emergency Response

Law Enforcement

Mapping

Military

Package Delivery

Surveillance

House of Batteries is staffed with a large team of experienced engineers and the advanced equipment needed to design, test, and manufacture the most complex lithium battery assemblies.

 Technical specs and performances

• Cell count: 45 (same rank cells)

• Cell type: Panasonic NCR18650GA – Made in Japan

• Electrochemistry: Lithium-ion NCA (LiNiCoAlO2)

• DC IR: less than 120mΩ

• Series-Parallel-Connected Cells: 9S5P

• Current capacity: 20.4Ah

• Voltage (nominal) 32.4V/33.3V

• Energy capacity: 648Wh

• Power: 2000W

• Maximum continuous discharge current: 30A

• Maximum pulse discharge current (10sec): > 50A

• Maximum allowable charge voltage: 38V

• The discharge end voltage should be more than 25V (recommended 27V  for long lifespan)

• Charging current (CC): max.10A

• Weight: +/- 2400g (including wiring harnesses, connectors & covering)

• Physical dimensions (distance between cell pack edges, excluding harnesses):  custom on demand.

Wiring harnesses and connectors

• Discharge wire type: Multi-strand 12AWG flexible silicone insulated copper

• Gold plated discharge connector (customizable): XT90s / EC5/ XT150 / AS150

• Discharge wire length (pack to connector end) +/- 100mm

 BMS

• with Linkage custom BMS inside for all kind of protection like over charge,over discharge, short circuit….to protect the battery and long life span.

• Shielded and Cooled Discharge Cable.

Optional

• LM35 Temperature Sensor, with a standard 3-pin connector.

• 10k NTC thermistor/sensor TDK Electronics.

• 6W Integrated Battery Heating System (IBHS), for sub-zero applications. Requires an external 6V power source from PDB/BEC of the aircraft.

Safety

• The upper part of the  cell is over-insulated with a ring-shaped dielectric material.

• The entire cell block is surrounded by a multi-layers shield with mechanical strength and      dielectric insulated, outside-reinforced with an aluminized film used in      the spacecraft industry. All covering materials provide a high sealing,      improve thermal performance and contribute to the robustness of the battery pack.

• The battery pack is externally wrapped in a hard (Black & Blue) PVC film.

Warranty

• 2 year

The recommended smart charger

Our Linkage smart charger 38V 10A

CMIUTA Electric Company can discuss specification or precautions that are not described here. The data on this page is for descriptive purposes only and is not marked to make or to entail any guarantee or warranty.

Extra function

1. Select our Smart battery PCM which transmits the battery data through bluetooth module then displays it through mobile APP.you will easy to check the battery status in any time,which will be quite helpful to mange the battery in the future.

2. There are two types of Bluetooth module: one is integrated type in the PCM; the other is external type with connector.

3. The Bluetooth module supports many communication protocols of CANBus,SMBus,HDQ,I2C,RS232,RS485. It’s also compatible with different brands of control IC: TI,O2Micro,Maxim,Freescale and so on.

Applications:

* Mobile base station back-up power

* Electric ship

* Uninterrupted Power Supply

* Golf cart

* Patrol car

* UAV

* Low-speed electric cars

Mobile phone APP display：

1. Battery pack voltage

2. Single cell voltage

3. Current

4. State of charge（SOC）

5. Charge or discharge State

6. Cycles

7. Temperature

8. Remaining capacity（RMC）

9. Design capacity（DCAP）

10. Full charge capacity（FCC）

11. Average Time To Empty（ATTE）

12. Average Time To Full（ATTF）

13. Serial Number（SN）

14. Manufacturer Name

15. Communication frequency

16. Manufacture date

17. Battery curve

Assembling BMS with Battery Module/Making Samples

Customized charger for charging!

Charging with @10A is only 31 degrees,no heat all all

TESTSTING PROCEDURE WITH 30A loading for few minutes,very reliable.

Batteries Waiting for testing

Packing

The Above table shows the comparative energy densities of various popular batteries.

The column on the far right shows energy density per unit weight of the battery and is what you should use for comparison.

The following comparisons are based on the weight of the various batteries being the same - the capacity will vary.

The Panasonic Lithium Ion battery has almost twice the energy density of an average Lithium Polymer battery.

The Panasonic supplies at least 25 percent more than a top of the line 

The LiPo battery performance is representative of the majority of batteries in common use in our UAVs.

Substituting a premium battery like the MaxxAmp can directly result in 25 percent longer flight times for equal battery weight.

And if you can accomodate the Panasonic Lithium Ion batteries slow discharge rate you can nearly double your flight times.

Why choose us?

• Our products and services are backed by a satisfaction guarantee.
• We pay attention to the introduction and training of talents, relying on the strong technical force and sophisticated production equipment to provide strong support for our development and growth.
• Our factory is equipped with advanced robotics and automation for efficient production and quality control.
• Pragmatism is a quality. We advocate starting from the simplest things, being down-to-earth, working hard, and doing every detail conscientiously and responsibly.
• We have a wide range of battery options to suit different UAV models and requirements.
• Our company based on the quality of the market, leading the industry with science and technology. We set up research centers, hire domestic and foreign experts, and continue to introduce advanced production equipment.
• We offer a range of customization options, including branding, packaging and labeling.
• Our cooperation is the beginning of win-win situation. We warmly welcome friends from all walks of life to visit, guide and negotiate business.
• Our company has a strong commitment to quality and safety, with certifications such as CE, FCC and RoHS.
• Our company has a well-organized, efficient, reliable team. We are able to design and develop high-quality UAV Battery with Bluetooth Controlled 9S 21AH, we would greatly appreciate the chance to convince you of our quality, ability and potential.

Hot Tags: uav battery with bluetooth controlled 9s 21ah, China uav battery with bluetooth controlled 9s 21ah manufacturers, suppliers, factory, 3 7 v 1200mah lipo battery sky viper, UAV Battery 14 8V NCR18650GA Cells, 3 7 v 200mah drone battery, drone battery 2200mah, UAV Battery With Bluetooth Controlled 9S 21Ah, Battery For Multirotor Drones Sanyo NCR18650GA Cells