EV Charger 48V Lithium Battery Charger 100A
HK-J系列3.3KW 全密封车载充电机规格书
● 概述
A product designed to supplement electric energy for electric vehicle power batteries. The product not only has the advantages of high efficiency, small size, high stability, long life, etc., but also has the characteristics of high protection level, high reliability, complete protection function, etc. It is an ideal power source for electric vehicle charging. The charger has a built-in thermal sensing device with overheat protection for automatic recovery. Fully sealed potting process with IP67 protection to ensure operation in any complex environment without causing failures.
Main features: full potting process, air-cooled heat dissipation (modular optional) can work reliably at -35 ° C - +85 ° C
Built-in temperature sensor for output shutdown under hazardous operating conditions (internal 90°C)
Protection class IP67 can work safely under short-term flooding conditions
l 技术规范
P/N | HK-J-H99-40 | |
Input | Input Volt | AC 90~265V |
Frequency | 45-65Hz | |
current | 16A | |
Power | ≥0.99 hallf loading | |
Effiency | ≥93% 满载 | |
Power Off | ≤5W | |
Main Output | Output style | 恒压 / 恒流 |
Output Volt | 25-99V | |
Output Current | 最大40A | |
Output Power | 3300W@220VAC 1600W@110VAC | |
Eternal Voltage Accuracy | ±1% | |
Eternal Current Accuracy | ±2% | |
Ripple Voltage rate | ±5% | |
低 压 输 出 | 输出方式 | 恒压 |
输出电压 | 13.8V | |
额定电流 | 5A | |
恒压精度 | ±2% | |
最大电流 | 5.5A±0.5A | |
输出功率 | ≥62.5W | |
纹波电压系数 | 1% |
保 护功能 | 输入过压保护 | AC270±5V |
输入欠压保护 | AC85±5V | |
输出过压保护 | 超过最高输出电压+1%时，停止输出 | |
输出欠压保护 | 低于最低输出电压－5%时，停止输出 | |
输出过流保护 | 超过最大输出电流+1%时，停止输出 | |
过温保护 | 85度开始功率下降，90度关机 | |
短路保护 | 停止输出 | |
电池反接保护 | 保险丝熔断 | |
接地保护 | ≤100mΩ | |
CAN通信保护 | CAN通信失效时自动停止输出 | |
断电保护 | 有 |
通 信功能 | CAN通信 | 有 |
波特率 | 125Kbps、250Kbps、500Kbps | |
终端电阻 | 无 | |
安规和其 它 | 耐压 | 输入对输出：2000VAC≤10mA 输入对地：2000VAC≤12mA 输出对地：2000VAC≤10mA，均为1min |
绝缘电阻 | 输入端、输出端、信号端对外壳≥10MΩ，测试电压1000VDC | |
电磁抗扰性 | 满足GB/T 18487.3-2001 11.3.1条 | |
电磁骚扰性 | 满足GB/T 18487.3-2001 11.3.2条 | |
谐波电流 | 满足GB 17625.1-2003 6.7.1.1条 | |
启动冲击电流 | ≤24A | |
电流上升时间 | ≤5S，超调量≤5% | |
关闭响应时间 | 100%到10%≤50mS，100%到0%≤200mS | |
防护等级 | IP67 | |
耐振动 | 10－25Hz振幅1.2mm，25－500Hz 30m/s2，每方向8小时 | |
噪声 | ≤60dB(A级) | |
MTBF | 150000H | |
工作环境 | 相对温度5%-95%无结露 | |
工作温度 | -35℃ ~ +85℃ | |
储存温度 | -55℃ ~ +100℃ |
l 安装尺寸(模块式)
l 安装尺寸(风冷式)
l 安装尺寸(水冷式)
l 型号定义
锂电型号(使能线控制)说明： 锂电配置号(使能线控制)说明：
HK- J- HXX- 40 XX LI XXXX- XXX /F -001
（1）（2）（3）（4） （5）（6） （7） （8）（9）（10）
（1）公司标识 （5）接口号: 01 02 03 04……
（2）J表示3.3KW系列充电机 （6）适用锂电池
（3）充电机最高输出电压（四舍五入取整） （7）单节最高电压 例如：3.65V则为365
（4）充电机输出电流 （8）电池容量
（9）F代表带风扇
P代表模块式
W代表水冷式
（10）客户配置代号，标准配置为001
锂电型号(CAN控制)说明： 锂电配置号(CAN控制)说明：
HK- J- H99- 40 XX CANXXXX /F -001
（1）（2）（3）（4） （5）（6） （7） （8）
（1）公司标识 （5）接口号：01 02 03 04……
（2）J表示3.3KW系列充电机 （6）CAN协议编号
（3）充电机最高电压 （7）F代表带风扇
（4）充电机最大电流 P代表模块式
W代表水冷式
（8）客户配置代号，标准配置为001
HK-J系列接口号说明：
01版本 02版本（PCB VER1.6） 03版本（PCB VER1.7-1.9）
CAN信号： 有 CAN信号： 有 CAN信号： 有
12V信号： 有且受控 12V0.2A信号： 无 12V0.2A信号：有且受控
12V5A电源：有 12V5A电源：有但不受控 12V5A电源：有但不受控
使能： 电压式 使能： 隔离PWM式 使能： 隔离PWM式
温度传感器： 有 温度传感器： 无 温度传感器： 无
指示灯： 红和绿 指示灯： 无 指示灯： 无
充电信号：常开触点一组 充电信号： 无 充电信号： 无
CC/CP: 无 CC/CP: 无 CC/CP: 无
AC电压检测: 无 AC电压检测：无 AC电压检测：无
l 接口定义图
输入接插件 输出接插件
型号： DY7-4ZJN 型号： DY7-4ZJW75°
对接插件型号: DY7-4TKP1N 对接插件型号: DY7-4TKP1W
品牌: 鑫喜 品牌: 鑫喜
A | N |
B | L |
C | / |
D | PE |
A | 输出正极端 |
B | 输出负极端 |
C | / |
D | / |
信号接插件
型号： DY7-6ZJN
对接插件型号：DY7-6TKP1N
品牌： 鑫喜
A | CANL |
B | CANH |
C | CANGND |
D | 12V5A+ |
E | 12V5A- |
F | 12V200mA |
Why choose us?
- We provide customized Lithium Battery Charger solutions to meet specific customer requirements.
- Our company establishes the enterprise brand, takes the market as the guidance, makes the enterprise bigger and stronger, develops new business fields with a new attitude, and tries our best to meet the various needs of different customers.
- We offer Lithium Battery Chargers in a wide range of specifications to cater to different customer needs.
- We attract customers with high quality products, move customers with considerate service and offer customers with preferential prices.
- We're a Chinese factory that produces high-quality Lithium Battery Chargers and provides professional services.
- The company wholeheartedly welcomes new and old customers to visit, negotiate, cooperate and develop together!
- Our Lithium Battery Chargers are designed to be durable and withstand everyday use.
- We carry out the management concept of taking excellent talents as the foundation, striving hard and rebuilding brilliance.
- We use advanced technology in our manufacturing process to produce Lithium Battery Chargers of the highest quality.
- The company insists on taking the social responsibility of self-development to promote the development of the EV Charger 48V Lithium Battery Charger 100A as its own responsibility, continuously improving the service level, and achieving a win-win situation with peers and customers.
Hot Tags: ev charger 48v lithium battery charger 100a, China ev charger 48v lithium battery charger 100a manufacturers, suppliers, factory, Handheld Digital Battery Tester 1 24S, 96V EV Battery Charger Waterproof IP67, 110V 3 3KW EV Battery Charger, 7S 29 4V Lithium Battery Charger 4A, 1S 4 2V 5A Charger, 48V 20A Battery Charger 1300W
Next
No InformationYou Might Also Like
Send Inquiry