48V 60AH Battery for Use of Telecommunication in Banking

48V 60AH Battery for Use of Telecommunication in Banking

48V 60Ah stationary Telecom and data center battery SPEC With RS485 232 interface,which those battery modules can be parallel to get a higher capacity.off-grid solar system storage, Telecommunication/BTS/Central data center/Power station/UPS. Basic Performance (1)Output with high efficiency:...
Send Inquiry
Product Introduction

48V 60Ah stationary Telecom and data center battery

 

SPEC

Basic Specification of 48V 50Ah Battery Pack

Nominal Capacity @ 0.2C

60Ah

com port

RS232, 485

Nominal Voltage

48V

Working life

ove 10 years

Discharge Cut-off Voltage

40V

Cell Type

LFP 3.2v

Charge Cut-off Voltage

54V

Dimensions(mm)

436*370*132

Charge Current

50A

Weight (including case)

25 kg

Continuous Discharge Current

50A

Charge Temperature Range

0°C~45°C

Peak Discharge (max. 10 sec. duration)

85A

Discharge Temperature Range

-20°C~60°C

Cycle Life (1C/1C 100% DOD)

2000 cycles

Charge Method

CC/CV

With RS485 232 interface,which those battery modules can be parallel to get a higher capacity.off-grid solar system storage, Telecommunication/BTS/Central data center/Power station/UPS.


Basic Performance 

(1)Output with high efficiency: Standard discharge current is 0.5C, instant impulse discharge current is 3C for 60 seconds.

(2)It is high integrated which save a lot installation space;

(3) High quality, with high temperature, it could work under 65°C temperature. The battery structure is reliable, without any heat stimulate,

(4) Good performance in low-temperature. discharge capacity decreases to over 80% under 0°C and discharge capacity decreases to over 60% under -20°C.

(5) Excellent safety characteristic: When the inside pressure  is too large, the one-way safety valve will release gas and heat to make sure battery safe,no explosion, When the internal pressure reaches a certain level, the valve will be open immediately which can protect the battery from burning and explosion, even with short circuit, just melting itself, no bombing and fire.

(6)Good cycle life time and consistency the discharge capacity is still over 80% after 2000 cycle times of single cell(80%DOD). High-performance material of lithium iron phosphate ,with perfect consistency battery cells and long recycling life

(7) It can support fast charging. It could be charged to 70% within 20 minutes and charged full with 2-3h.

(8)Full protection functions like high  and low voltage protection

(9)Cost effective to buy from us.

 (10)Modular and quick plug design makes it easy to use and maintenance

Battery can be controlled with remote monitoring via communication interface.

 

BMS Feature

ASIC chip, high precision acquisition, automotive grade material, Lightning Surge Immunity Test, redundancy design, high temperature aging, electron- static discharge, EMC, current balancing technology, maintenance-free battery system, The water detection, smoke detection, collision warning system actively.

FEEDBACK


Temp. Balance & Bonding

Aluminum wire bonding process with bus-bar design, triaxial vibration design, waterproof and dustproof design, structure lightweight design technology, which solved the core issue of power battery, improving the safety, reliability and stability. At the same time, the problem of BATTERY heating, heat dissipation was managed by temperature equalization technology ,which improve the battery performance and life span. PLB continue to optimize the battery pack design, so as to ensure the safety of product.

 

 


 

Why choose us?

  • We offer flexible payment options to make it easy for our customers to acquire our products.
  • We have to gradually standardize the company's business management activities in accordance with the modern enterprise management system to achieve the organic combination of responsibility, power and benefit, so that the responsibility and rights of each department and employee of the company can be balanced with each other.
  • With our commitment to quality and innovation, we are constantly pushing the boundaries of what is possible.
  • We will always provide our customers with a full range of quality services and regard customer satisfaction as the only standard by which we measure our own work.
  • As a supplier and manufacturer, we offer favorable prices to our customers.
  • We actively promote the integration of social responsibility into the company's strategy, corporate culture and daily operations, and give full play to the core strengths of the company.
  • Our 48V LiFePO4 Telecom Batteries are designed to meet the rigorous demands of the telecommunications industry.
  • Our company focuses on 48V 60AH Battery for Use of Telecommunication in Banking industry. We focus on quality, continue to innovate and strive to lead the development of the industry and become a globally high-quality manufacturer. Our goal is to create maximum value for our customers, make employees fulfill their duties, and realize the perfect combination of personal interests and corporate interests, promoting the development of the company.
  • Our delivery times are prompt and reliable, ensuring that our customers receive their products on time.
  • We produce in strict accordance with the quality management system to ensure the professional quality of products and provide customers with better products.

 

Hot Tags: 48v 60ah battery for use of telecommunication in banking, China 48v 60ah battery for use of telecommunication in banking manufacturers, suppliers, factory, 48V 20Ah Telecom Battery Data Center Battery, 48V 10 2Ah Telecommunications Batteries, 48V 60Ah Stationary Dc Power Systems, 48V LiFePO4 Telecom Battery, Telecom Battery, 48V 200Ah Stationary Telecommunications Batteries

Send Inquiry

whatsapp

skype

E-mail

Inquiry